Thread Rating:
  • 38 Vote(s) - 3.13 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Using a Fanvil X6 Phone with Jabra 920 Headset
Ensure that the Fanvil Phone has the most current Firmware.

Connect the Fanvil/VT EHS (Electronic Hook Switch) to the Jabra 920 Base as shown here:


Log into the Fanvil Phone and Enable the EHS as shown here.
Note: If you only have options for "Disable" and "Plantronics" then you need to upgrade the Firmware.


If you want both the Headset and the Phone to simultaneously ring then Disable "Ring From Headset".
If you Enable "Ring From Headset" then only the Headset will ring - this a personal choice.


Note: The Headset Button on the Phone does very little other than open a Line to the Headset for dialing out - a bit of a limiting factor with these Fanvil Phones and unlike the Yealink Series where the Headset Button toggles "everything" between Headset and Phone.

Forum Jump:

Users browsing this thread: 1 Guest(s)